K4 Incinerator fins
The K4 Incinerator fins are a fantastic choice for your quad fin, twin or thruster configured windsurf board!
They have a narrower base for higher speeds and lightning fast direction changes, while the larger area tip gives more hold and power.
Designed in conjunction with Adam Lewis who’s been looking to get the best performance from his quads.
We are HUGE fans of these…they’re fast, controllable, and grippy when needed. Highly recomended.
The K4 Incinerator fins are a fantastic choice for your quad fin, twin or thruster configured windsurf board!
They have a narrower base for higher speeds and lightning fast direction changes, while the larger area tip gives more hold and power.
Designed in conjunction with Adam Lewis who’s been looking to get the best performance from his quads.
We are HUGE fans of these…they’re fast, controllable, and grippy when needed. Highly recomended.
The K4 Incinerator fins are a fantastic choice for your quad fin, twin or thruster configured windsurf board!
They have a narrower base for higher speeds and lightning fast direction changes, while the larger area tip gives more hold and power.
Designed in conjunction with Adam Lewis who’s been looking to get the best performance from his quads.
We are HUGE fans of these…they’re fast, controllable, and grippy when needed. Highly recomended.
The K4 Incinerator fins are the best choice for your quad fin board!
The K4 Incinerator fins have been developed with PWA pro rider Adam Lewis, who was looking to maximise the speed from his quad fin boards.
ORDERING AND LEAD TIME
We supply these as PAIRS of fins…NOTE: you are ordering a PAIR of fins. (If you just need 1 no. fin, please email us.)
Sizes 8-11cm are fronts, while 14-16.5cm are rears…the rears are slightly more upright.
There are more than 20 different variants on this model fin. For this reason Bigsurf and also K4 themselves can struggle to hold stock of each different size/fitting, all of the time. But we do have the more popular sizes in stock, so chances are that YES we do indeed have them in stock.
However if for some reason we don’t, we can have the guys at K4 send them to us within a few days. And even if K4 are sold out, we can see when they are doing a production run next…OR there may be an alternative fin that will work for you also as the range is large.
So if we don’t have what you need, we will contact you to discuss very soon after receiving your order and checking our stock.
TERMINOLOGY ON K4 FINS
These ratings are to compare K4 Fins only. K4 fins are lighter, looser and grippier than anything else on the market with test-winning performance. This fin guide will help you dial in your board for ultimate performance.
RELEASE/GRIP: This is a choice you have to make. Do you want to do huge wrapping gouging roundhouse cutbacks with ultimate grip, or would you rather the tail spun more easily into a Taka? Size choice will also affect release.
LOOSE/DIRECTIONAL: Again a personal preference as to whether you like your board to feel loose and skatey, or more directional and on rails or planted.
SNAP/CARVE: Snap and pivot for tight ‘in the pocket’ surfing, or carve for more drawn out turns on open faces. This is related to looseness/control but more to do with template than flex.
LOW DRIVE/HIGH DRIVE: Your immediate thought might be that the more drive the better, right?! Not always the case. Quite often on multifin boards you’ll find yourself flying up at the lip but without the ability to get the board turned, this is too much drive. Of course in slow low power waves and onshore winds drive is a good thing.
