Footstrap Screw - All boards
Genuine footstrap screw to secure footstraps to your board.
PZ2 head.
Available in two sizes…
6mm x 26mm …this is the standard size
7mm x 28mm …larger size, ideal if you have stripped plugs in your board
Genuine footstrap screw to secure footstraps to your board.
PZ2 head.
Available in two sizes…
6mm x 26mm …this is the standard size
7mm x 28mm …larger size, ideal if you have stripped plugs in your board
Genuine footstrap screw to secure footstraps to your board.
PZ2 head.
Available in two sizes…
6mm x 26mm …this is the standard size
7mm x 28mm …larger size, ideal if you have stripped plugs in your board
Footstrap screws for your windsurfing boards…genuine parts.
Genuine stainless steel footstrap screws for use on your windsurfing boards. Is it recommended to replace footstrap screws every 2-3 years to avoid breakage, in turn leaving part of the screw within the footstrap insert of your board, which is possible to remove but a very difficult task. Also worth replacing these when they become stripped or burred from screw driver not being inserted into the head of the screw enough, or due to the screwdriver jumping out when torque is applied.
Standard footstrap screw, as supplied by most board manufacturers is 6mm diameter x 26mm long.
Oversized footstrap screw is ideal for stripped out plugs or inserts and is 7mm diameter x 28mm long.
Price is per screw.
Don’t forget to order your toothed washers also…these are necessary to stop twist in the strap.
